KD-BM III & BL III & KD BC Tissue Embedding & Cooling System

Features:

• Fully programmable computer control allows automatic system start and stop anytime (weekly)

• The use of new silicon rubber heating elements achieves rapid even, reliable, energy saving heating

• Temperature is precisely measured by temperature-sensing integrated blocks made in USA, and is LCD-displayed with icons demonstrating current working status

• Five heated areas, including Paraffin Chamber, Paraffin Dispenser, left and right Thermal Storage Compartments, and heating plate (working area), are individually controlled and work independently without interference from each other

• Five temperature-control channels and multiple overheating protection mechanisms provide safe, reliable, and energy-saving protection

• Automatic memory and restoration functions: After startup, all preset temperature data are automatically stored in the system

• Flexible module configuration options through a design which separates the Cryo Module from Embedding Module, enabling easy maintenance

•  Freezing temperature can be adjusted due to the use of a new-type inverter compressor

• The temperature of the cryo plate equipped with this system is controlled independently and can be used to freeze tissue more conveniently, particularly for small specimens

•  Paraffin Chamber with super large capacity enables embedding a large number of specimens at same time

• Safe and reliable low-voltage illuminating system with two ON/OFF control options (finger or foot-operated)

•  Heated working plate and forceps wells make tissue embedding more convenient

• High-precision clock makes time setting more convenient and accurate

• There is an automatic actuation, can make sure the unit will continue working after a power-down

• Using the imported solenoid valve to help the Paraffin Dispenser to adjust the flow rate

• This unit set the control power socket, it can work with BL and BC and the same time.

Technical Specifications:

• Paraffin Chamber Capacity: 4 liters

•  Temperature Range of Forceps Wells: RT - 85 C 

• Temperature Range of Paraffin Chamber: RT - 85 C

• Temperature Range of Thermal Storage Compartment: RT - 85 C

• Temperature Range of Working Plate (hot plate): RT - 85 C

• Temperature Range of Paraffin Dispenser: RT - 85 C

• Temperature Range of Thermal Storage Plate: RT - 85 C

•  Temperature Control Precision: +/-1%

• Thermal Storage Compartment Capacity: 4.5 liters

• Paraffin Flow Control: Paraffin flow control via finger touch plate and optional foot pedal

• Fully programmable ON/OFF control allows automatic system start and stop anytime weekly

•  Temperature Range of Cryo Module: RT to -20 C

• Temperature Setting of Cryo Module: the optimal working temperature is approximately -15 C and the temperature is under delay protection

• Dimensions of working plate (BM III): 155x90mm

• Dimensions of small cold plate (BM III)60x50mm

• Dimensions of Cryo Module (BL III): 340x322mm

• Working Voltage: AC 220V +/-10% 50Hz (standard model); AC110V +/-10% 60Hz

• Power:

  •  1000W (KD-BM III)

  • 300W (KD-BL III)

  • 180W (KD-BC)

• Dimensions:

  • 670x590x445 mm (WxDxH) (KD-BM III)

  • 685x380x430 mm (WxDxH) (KD-BL III)

  • 620x380x425 mm (WxDxH) (KD-BC)

• Net weight:

  • 33kg (KD-BM III)

  • 26kg (KD-BL III)

  • 15kg (KD-BC)